THEPACHSTORE
Dark Shadowblade v2 Custom Saber
Dark Shadowblade v2 Custom Saber
Couldn't load pickup availability
This Saber is currently on a PRE ORDER STATUS for release in JUNE - JULY 2023.
Please contact our Customer Service team at www.facebook.com/thepachstore if you need more info.
Introduction (PLEASE READ FULL DESCRIPTION INCLUDING USAGE)
Long awaited this is the ergonomic slim version of our v1 dark saber, fits a 1 inch blade - made from aluminum and absolutely duel worthy!
OPTIONS
1) EMPTY HILT REGULAR - REGULAR (10 and 12mm switch holes)
2) EMPTY HILT FLYTE (14mm and USB Switch holes)
3) Fully Installed Regular RGB
4) Fully Installed FLYTE SMOOTHSWING RGB
PLEASE CHOOSE OPTIONS CAREFULLY - Empty hilt = No electronics, Hilt only.
if Fully Installed Regular RGB Features
9W LED RGB Color changing LED
6061 Aluminum Gunmetal Green Finish
2W 8ohm speakers, 3 Soundfont and mute function
Hum, swings, lockup, clash soundfonts
Mounted Chassis to reduce damage to internals during dueling
18650 Lithium Ion Rechargeable battery with protection board (Charge with 5V 1A ONLY) approx 1-1.5 hrs use time
USB Inhilt recharge port (Charge with 5V 1A ONLY)
if Fully Installed Regular FLYTE SMOOTHSWING RGB Features;
9W LED RGB Color changing LED
6061 Aluminum
2W 8ohm speakers, Hybrid Smoothswing with ability to customize fonts
Hum, swings, lockup, clash soundfonts
Mounted Chassis to reduce damage to internals during dueling
18650 Lithium Ion Rechargeable battery with protection board (Charge with 5V 1A ONLY) approx 1-1.5 hrs use time
USB Inhilt recharge port (Charge with 5V 1A ONLY)
Fits only 1" Mid grade polycarbonate Blade, A 1x36" blade is included in fully installed purchase.
Great beginners starter lightsaber for dueling and performance
Also available as a Empty hilt only with no electronics
Hilt dimensions
Aluminum, Emitter 26mm ID x 39mm OD
350mm Length x 20mm ID x 26mm OD Includes a 10mm and 12mm pre drilled holes
**Please note pictures attached are prototypes, final version will have speaker vents on the side of the hilt, above pommel.
This Saber is currently on a PRE ORDER STATUS for release in JUNE - JULY 2023.
On Release, Please allow 3-5 working days for them to be shipped, shipping takes 4-9 days, tracking numbers active after 24-48 hours of notice.
Please note that as all the work is done by hand, small imperfections may occur and differ from hilt to hilt including micro dents and chips.
Store Policy T&C applies.
Non Refundable Deposit forfeited if cancelled before release.
By purchasing this item, you agree to the following purchase conditions:
Please read before completing the order. https://thepachstore.com/pages/purchaseconditions
All purchases and shipping excludes taxes if any








